WLD-1200T Fully Automatic Transmission Fluid Oil Exchange System

Product Description

According to the maintenance manual for automatic transmission, the transmission oil should be changed after 5-6 million KM in order to avoid the oil changing, otherwise the working of the automatic transmission should be abnormal. Currently most of the cleaning and oil exchanging equipment of automatictransmission in the market is manual adjusted the oil valve to control the oil exchange which can not make sure that all the old oil in the transmission can be totally replaced with new oil and also can not easily control the volume of the oil exchange, for such reason, it's very easy to make the oil filling more or less than needed and make the damage of the automatic transmission and make it defect, the new development equipment from our company WLD-1200T for automatic transmission cleaning and oil exchanging equipment use the hydraulic torque variation can make the oil change rate close to 100% within 15 minutes, and make more efficiency for the oil changing and operated fully automatic, it can identification the direction of the oil inlet or outlet automatically, it's do not need to recognized by operator, very harmonize to operation, it's your best choice for WLD-1200T and we are sure it will be your most efficient assistant.
Function:
1.Automatic identification the direction of the oil flow and can change the director of the oil flow;
2. Can make the change of old and new oil automatically;
3. Fully automatic intelligent electronic control to make the old and new oil exchange with high-precision;
4. Automatic identification the positive and negative position of the power;
5. Automatic for cycle cleaning function of automatic transmission;
6. The oil filling for the automatic transmission is also automatically;
7. Automatically reduce the automatic transmission oil;
8. The oil pressure of the transmission radiator can be displayed visually;
9. LCD display, friendly operation, convenient and practical;
10.Wide range of special connectors, suitable for the vehicle series from Europe, Americas and Asian;
11. Can effectively solution the non completed oil exchanging form manual changing of the oil;
12. Can improve the performance of the transmission;
13.  Extension the using life of gearbox.
Technical Specifications:
*   Voltage: DC12V
*   Maximum power: 150W
*   Pressure Gauge: 0 ~ 150psi
*   Length of oil outing pipe: 2.5m
*   Length of oil return pipe: 2.5 m
*   Length of oil exhaust pipe: 2m
*   Filter accuracy: 5um
*   Fuel tank: 20L × 2
*   Equivalent replacement error: ± 0.1kg
Working environment:
*Operating Temperature:                -20 ~ 80 ºC
*Relative humidity: <85%
*   Noise: <70db
*   Net weight: 60Kg
*   Gross Weight: 70Kg
*Dimension:Carton:54*53*109=0.32cbm


Leave Message

Wld-at Air Tire Inflation Machine

WLD-20DT Auto-transmission Fluid Oil Exchanger

WLD-L180A Manual Model A/C Refrigerant Recovery And Charging Machine

WLD-L900 Bus A/C Refrigerant Recovery & Charging Machine

WLD-X520 Fully Automatic A/C System Flushing And Cleaning Machine